Press Machine Specs

Machine No.	Tonnage	Make	Shot OZ	Tie Bar (in) HxV	Tie Rod Diameter	Mold Thick Min	Mold Thick Max	Core Pull	Clamp Stroke	Ejector Stroke	K.O Pattern	K.O Thread
19		Trueblood	1.5			SHUTTLE		NO
22	110	Toshiba	4	16.1X16.1	3.75	7	17	NO	13.8	3.5	7X7	1/2-13
30	300	Van Dorn	25	25X25	4.25	8	25	YES	24	6	7X7/4X16	1/2-13
31	1000	UBE	185	50X50	8	19	47	YES	55.11	7.78	6X28/10X40	5/8-11
32	500	UBE	58	31.88X31.88	5.06	15	31.5	YES	31.49	5.51	7X7/4X16/6X28	1/2-13
37	170	Van Dorn	8	20X20	2.15	6	18	YES	17	4	7X7/4X16	1/2-13
38	1000	UBE	185	50X50	8	19	47	YES	55.11	7.87	6X28/10X40	5/8-11
41	85	Van Dorn	3.7	16X13.6	2.4	4	16	NO	12	3	7X7/7X10	1/2-13
42	170	Van Dorn	3.7	20X20	3.25	6	18	YES	17	4	7X7/4X16	1/2-13
45	720	UBE	120	37.4X37.4	6.3	15.75	39.37	YES	39.37	7.08	7X7/4X16/6X28	5/8-11
46	120	Van Dorn	8	17X17	2.75	6.16	16	YES	14	3	7X7/10X10	1/2-13
47	230	Van Dorn	14	22X22	3.5	7	22	YES	20	4.5	7X7/4X16	1/2-13
51	200	Nissei	11.2	20.87X20.87	3.54	9.8	19.6	NO	17.7	4.33	7X7/4X16	1/2-13
29	230	Van Dorn	8	22X22	3.75	7	22	YES	20	4.5	7X7/4X16	1/2-13
54	100	Engal	5.3		2.5			YES			7×7/7×10	1/2-13
58	937	Battenfeld	146	47.24X39.37	6.5	19.7	39.4	YES		9.5	7X7/4/16/6/28	5/8-11
59	50							NO			7X7
60	328	HK KIMING	35	25.9X25.9		11.8	28.34	YES	25	7	8×8/3.94×15.74	1/2-13
61	518	HK KIMING	65	31.88X30.7	5	13.78	36.22	YES	30.5	8.6	8×8/3.94×15.74	1/2-13
62	228	HK KIMING	10	22.83X22.83	5	9.44	24.8	YES	21.06	6.3	8×8/3.94×15.74	1/2-13
63	168	HK KIMING	10/15.4	16.92X19.09	4	5.9	23.62	YES	16.92	4.33	7X7	1/2-13
64	98	HK KIMING	3/6.3	11.85X14.15	3	4.72	13.77	YES	10.43	2.75	7X7	1/2-13
65	360	HPM		28X26.5	4	8.75	34.5	YES	23	6.5	7×7/4×16	1/2-13